Categories

Hot Products

News

Patient Monitor Accessories Operating Procedures
Dec 05, 2017

Monitor operation procedures:

First, the operation steps:

1, check the monitor all accessories intact. 

2, connected to the monitor power supply, the system self-test. Check the function required for patient care to ensure that the instrument is in good working condition. 

3, the ECG, blood oxygen probe, blood pressure cuff connected to the patient, select the patient type (newborn, children, and adults), the screen shows ECG, blood oxygen, respiratory waveform, start the blood pressure keys to show the parameters of blood pressure. 

4, set the ECG, blood oxygen, blood pressure, breathing the function of the alarm parameters of the upper and lower limits. The instrument is in normal working condition. 

5, according to the alarm level to deal with the alarm appear, you can view the patient monitoring information through review. 

Second, note:

1, equipment failure alarm sound immediately notify the maintenance staff. 

2, after the end of the guard, clean the machine appearance, the lead line, oxygen probe and other accessories properly stored. 

3, long-term standby state monitor once a week to ensure that the battery backup. 

4, clean the machine surface, you should use a clean and soft cloth, adsorption of non-erosive cleaning agent, proper wring dry wipe. 

5, after cleaning the use of dry wipers will clean the machine clean the cleaner, not allowed to water or detergent into the chassis, switch, any vents.

The operation steps: 

1, check the monitor all accessories intact. 

2, connected to the monitor power supply, the system self-test. Check the function required for patient care to ensure that the instrument is in good working condition. 

3, the ECG, blood oxygen probe, blood pressure cuff connected to the patient, select the patient type (newborn, children, and adults), the screen shows ECG, blood oxygen, respiratory waveform, start the blood pressure keys to show the parameters of blood pressure.  

4, set the ECG, blood oxygen, blood pressure, breathing the function of the alarm parameters of the upper and lower limits. The instrument is in normal working condition. 

5, according to the alarm level to deal with the alarm appear, you can view the patient monitoring information through review. 

Second, note:

1, equipment failure alarm sound immediately notify the maintenance staff. 

2, after the end of the guard, clean the machine appearance, the lead line, oxygen probe and other accessories properly stored. 

3, long-term standby state monitor once a week to ensure that the battery backup. 

4, clean the machine surface, you should use a clean and soft cloth, adsorption of non-erosive cleaning agent, proper wring dry wipe. 

5, after cleaning the use of dry wipers will clean the machine clean the cleaner, not allowed to water or detergent into the chassis, switch, any vents.


  • QR CODE
  • facebook